VISION OF ELEGANT LIVING

Naia Seaside is a vision of elegant living in the bustling tourist area of Paphos. Located on Poseidonos Ave opposite the town’s most attractive seafront resort hotels and only 150m from the nearest sandy beach, this 4-storey building is only steps away from the sun, fun and holiday activity of the resort.

The stunning low-rise design is allocated to only three exclusive 3-bedroom apartments: one on the first floor, one on the second floor, and a lavish duplex penthouse combining the third and fourth floor, which opens onto the roof terrace with private pool.

Naia Seaside enhances each luxury apartment with a number of practical features such as anensuite bathroom for each bedroom, private parking for each apartment, reserved private elevator for each residence, and the wonders of beautiful sea views with magical sunsets.

BUILDING ANALYSIS

PLOT 644 m2
PILOTIS / LOBBY 48,5 m2
ENCLOSED SPACE 419 m2
COVERED VERANDAS 102m2
UNCOVERED VERANDAS 62,25 m2
PLANTERS 48,3 m2
UNCOVERED STAIRCASE 6,15 m2
POOL 42,6 m2
PARKING PLACE 52 m2
TOTAL 781,35 m2

FIRST FLOOR

BEDROOMS 3
BATHROOMS 3
LIVING AREA 127,1 m2
COVERED VERANDAS 29,1 m2
UNCOVERED VERANDAS 5,7 m2
PARKING PLACE 12 m2
PILOTIS / LOBBY 12,6 m2
TOTAL COVERED AREA 168,8 m2
PLANTERS 18,4 m2
UNCOVERED STAIRCASE
POOL

SECOND FLOOR

BEDROOMS 3
BATHROOMS 3
LIVING AREA 127,1 m2
COVERED VERANDAS 29,1 m2
UNCOVERED VERANDAS
PARKING PLACE 12 m2
PILOTIS / LOBBY 13,3 m2
TOTAL COVERED AREA 166,6 m2
PLANTERS 18,4 m2
UNCOVERED STAIRCASE 6,15 m2
POOL

THIRD FLOOR

BEDROOMS 3
BATHROOMS 3
LIVING AREA 165,25 m2
COVERED VERANDAS 43,85 m2
UNCOVERED VERANDAS 56,55 m2
PARKING PLACE 28 m2
PILOTIS / LOBBY 25,6 m2
TOTAL COVERED AREA 262,7 m2
PLANTERS 11,5 m2
UNCOVERED STAIRCASE
POOL 42,6 m2

CONSTRUCTION SPECIFICATIONS

STRUCTURE:

Reinforced concrete, beams and slabs, designed to seismic specifications (euro codes 2,8). Concrete category C30/37. Reinforcement category B500S (origin country to be member of European Union).

Energy performance of building according to the 2019 regulations (category B+).External Walls isolation System StoTherm Classic, Aluminum System Rabel

WALLS AND PARTITIONS:

External Walls: 25 cm thick of high-quality hollow bricks (Ledra series 9LB25 thermal), two coats of plaster and finished with external wall insulation system type StoTherm Classic with 7cm expanded polystyrene insulation board (Sto-EPS Board), made in Germany.

Internal Walls: U15 ULTRA board system (Knauf, Germany or Rigips, Italy) of 10 cm on both sides and Rockwool internally

PLASTERING:

External surfaces will be finished according to the specifications of the insulation system StoThermal Classic, Germany.

Internally all external(brick) walls will be finished with 3 coats of cement plaster. The internal partitions will be finished with at least 2 coats of spatula.

The exposed ceilings will be finished with acrylic rendering coating.

PAINTING:

  1. Internally spatula and 3 coats of oil paint in bathrooms and toilets. The color of the paint to be approved by the client’s Interior Designer.
  2. All walls magnolia – ceilings white or other of the client’s choice. The color of the paint to be approved by the client’s Interior Designer.

WALL FITTINGS:

Walls in bathrooms and toilets generally will be lined with glazed tiles (Imported from Italy) or marble up to ceiling height with an allowance of €45.00 per square meter. The space between counter tops and cupboards in the kitchen will have Corian flash back with an allowance of €180.00 per square meter.

FLOORING / ALL AREAS:

Italian Imported Ceramic tiles or marble or solid wood in all areas with an allowance of €45.00 per square meter. Marble for stairs, with an allowance of 100 euros per meter. Calacatta Series from LEA Ceramica or Marble from Thassos or Solid Wood-Oak Rustic natural oiled from Germany.

DOORS AND WINDOWS:

Entrance security door made of irocco solid wood, cost of €1000.00. All other doors and windows will be silver (or any of clients choice but approved by supervised architects)aluminum and will be double glazed with fly screen provision. The door / windows system must have Uw≤2.9W/m2.K. Italian design interior doors with high quality door furniture €350.00/each, imported from Italy, model GB DORICO.

WARDROBES:

Italian design wardrobes €280.00/m², imported from Italy model SANTA LUCIA ACRYLIC.

KITCHEN:

Italian design kitchen with Granite worktops €200.00/r.m. and Granite type sink or marble surfaces with stainless steel sink(FRANKE). Kitchen cost €400.00/m2

SEWAGE:

Connection to main sewage system.

SANITARY FITTINGS:

White Italian fittings in bathrooms, W.C. Duravit-model Architect, wash basins Duravit-model Architect, bath Duravit- model Cube or shower Duravitmodel Texas and accessories Hans Grohe. All mixers German – Hans Grohe –model Talise. Allowance €2.000 / bath or WC.

DRAINAGE:

Pipe in pipe system as per Local Authority Requirements. 2 taps in garden area and one on roof garden. Irrigation System with automation in the garden.

ELECTRICAL INSTALLATION:

A complete electrical installation in accordance with the Electricity Authority’s requirements. Provision for telephone, T.V, T.V antenna outlet and Cable TV, Alarm System.

Provision for Air Conditioning in each room. 3 double sockets in each room.Water proof double socket on roof-terrace and on the terrace outside the kitchen.

DRAINAGE:

Pipe in pipe system as per Local Authority Requirements. 2 taps in garden area and one on roof garden. Irrigation System with automation in the garden.

LIGHTING:

All lights of each apartment internally / externally will be led technology, with an allowance of €1800. Supplier PGS Lighting, all fittings from Spain,Italy, Germany.

HOT WATER SUPPLY:

Solar and electric heater with two solar panels and a water tank with a capacity of 1200 liters and hot water cylinder of 220 liters. Water pressurizing system (type Grundfos MQ 3-45). Water filter for all the apartments, QWater System.

ROOF / BALCONIES:

10cm expanded polystyrene insulation board (type Sto-EPS Board Top32 CE) will be used for thermal insulation of roofs and balconies above internal spaces. Above the insulation a 10cm C25 concrete screed (including Y6/20 steel mesh) will be made and a flexible fiber reinforced mortar type Sikalastic-1K will be used to seal and waterproof the roofs and balconies.

The tiles on roofs and balconies will be placed using cement mortar. A high polymer modified cementitious water repellant joint filler (of the client’s engineer approval) will be used for grouting the ceramic tiles.

Glass protective railing will be installed on roof and balconies edges. The type of the fixings of the glass will be of the client’s choice,allowance of 200 Euros /m A Sink and a shower will be installed on the roof (with cold and hot water).

Wooden partitions will be used for hiding the mechanical installation on the roof. Only mechanical installation belonging to the apartment should be placed on
the roof.

FRONT ELEVATION:

The materials used on the front elevation (wood and /or fare face concrete/hpl metal /glass) will be decided according to the architect’s design and specifications. The material to be approved by the building architects engineer.

SWIMMING POOL/ PENTHOUSE:

The swimming pool dimensions are 7m x 3.5m. Swimming Pool Construction Company is Saratoga Pools.

Swimming Pool Walls, will be monolithic Reinforced concrete. Water pump, motor and filtration System Pentair-America.

The swimming Pool will be finished with Italian ceramic tiling or 3D effect PVC Liner from Rinolit 3000 Touch, made in Germany.

ENTRANCE:

Electrical Gates for pedestrians and cars, with remote controls

Any changes requested by the clients may be of additional extra cost.

BROCHURE

Click the image below to read the brochure.

Open Book